Lopi Yankee PS User Manual download pdf (Page 40)

40 Safety Label

WARNING - DO NOT REMOVE OR COVER THIS LABEL

Listed Pelletized

Solid Fuel Burning Appliance

Also for Use in Mobile Homes

Model: Yankee PS

Serial No:

Tested to: ASTM E, 1509, and ULC-C1482-M1990 Room Heater Pellet Burning Type (UM) 84 HUD

Electrical Rating: 115V, 60Hz, 3 Amp; Start 3 Amps, Run 1.5 Amps

Maximum Input Rating: 5.5 lbs (2.5kg)/hr

This pellet fired appliance has been tested and listed for use in manufactured (mobile) homes in accordance

with OAR 814-23-900 through 814-23-909.

WARNING - FOR MANUFACTURED HOMES: Do not install appliance in a sleeping room. Must utilize outside

combustion air inlet (part #99200136) or equivalent. Structural integrity of the manufactured home floor,

ceiling, and walls must be maintained.

Install only in accordance with the manufacturer’s installation and operating instructions. Contact local

building or fire officials about restrictions and installation inspection in your area.

Use only listed 4 in./100 mm diameter listed type “L” or “PL” venting system. See manufacturer’s installation

instructions and local codes for precautions required for passing chimney through a combustible wall or

ceiling. Do not connect this appliance to a vent serving another appliance. Inspect and clean exhaust venting

system frequently in accordance with manufacturer’s instructions.

May be installed in a sleeping room with use of outside combustion air inlet (Part #99200136) or equivalent.

Minimum Clearance to Combustible Materials (Measured to Stove Top)

BACKWALL

LEFT SIDEWALL

FLOOR PROTECTOR

ADJACENT WALL

RIGHT SIDEWALL

Interior Vertical Horizontal Through

Flue Installation the Wall Installation

Left Sidewall A 9” 9”

Right Sidewall B 9” 9”

Backwall C ** 3”

Corner D 3” 3”

Flue Vent E 3” 3”

Maximum alcove depth 48 in/1220 mm, minimum ceiling height 60 in/1525 mm, minimum alcove width

44 in/1115 mm.

Combustible floor must be protected by a non-combustible material, extending to the front (G) 6 in/150 mm

and to the sides (H) 0 in/0 mm.

EXCEPTIONS: Non-combustible floor protection must extend beneath a vent tee when installed.

** This dimension will vary depending on brand of listed type “L” vent. See manual for details.

For use with 1/4 in/6 mm to 5/16 in/7 mm diameter pelletized wood fuels only.

Replace glass only with 5 mm ceramic glass available from your dealer.

DANGER: Risk of electrical shock. Disconnect power supply before servicing. Route power cord away from

unit. Do not route power cord beneath heater.

Operate only with viewing door and ash removal tray tightly closed. Do not obstruct combustion air openings.

The space beneath heater must not be obstructed. Keep all furnishings away from heater.

U.S. ENVIRONMENTAL PROTECTION AGENCY

This model is exempt from EPA certification under 40 CFR 60.531 by definition

[Wood Heater (A) “Air-to-fuel Ratio”].

Date of Manufacture

2001 2002 2003 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

DO NOT REMOVE THIS LABEL MADE IN U.S.A.

Mfg. by TRAVIS INDUSTRIES, INC.

10850 117th Pl N.E.

Kirkland, WA 98033

Report No. 028-S-62-2

????

1 2 ... 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Lopi Yankee PS User Manual Page 40

Comments to this Manuals

Related products and manuals for Tools Lopi Yankee PS