Lopi Yankee PS User Manual

Browse online or download User Manual for Tools Lopi Yankee PS. Lopi Yankee PS User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Yankee™
Pellet Stove
Horizontal Or Vertical Vent
Freestanding Stove
Mobile Home Approved
Class A Chimney Retrofit
Hearth Stove into Existing
Masonry Chimney , Masonry
Fireplace, or Z.C. Fireplace
Tested and Listed by
Omni-Test Laboratories, Inc.
Portland, Oregon
Report # 028-S-62-2
ASTM E1509-2004
-- Please read this entire manual before installation and use of this pellet fuel-
burning room heater. Failure to follow these instructions could result in property
damage, bodily injury, or even death.
-- Contact local building or fire officials about restrictions and installation inspection
requirements in your area.
-- Save these instructions.
Installer: After installation give this manual to the home-owner and
explain operation of this stove.
$10.00 Copyright 2008, T.I. Part # 100-01156
4080728
4800 Harbour Pointe Blvd. SW
Mukilteo, WA 98275
Page view 0
1 2 3 4 5 6 ... 41 42

Summary of Contents

Page 1 - Pellet Stove

Yankee™Pellet Stove• Horizontal Or Vertical Vent• Freestanding Stove• Mobile Home Approved• Class A Chimney Retrofit• Hearth Stove into ExistingMason

Page 2 - Introduction

10 Installation (For Qualified Installers Only)© Travis Industries 4080728 100-01156Pellet Vent Type• Must be 4" diameter Type "L" (ex

Page 3 - Table of Contents 3

Installation (For Qualified Installers Only) 11© Travis Industries 4080728 100-01156Mobile Home Requirements• Outside air is required (used forcombus

Page 4 - Safety Precautions

12 Installation (For Qualified Installers Only)© Travis Industries 4080728 100-01156Alcove Installation RequirementsWhen the pellet stove is placed i

Page 5 - Safety Precautions 5

Installation (For Qualified Installers Only) 13© Travis Industries 4080728 100-01156Thermostat Installation! Do not connect 120 VAC to the thermostat

Page 6 - Specifications

14 Installation (For Qualified Installers Only)© Travis Industries 4080728 100-01156Installation Example: Direct "Through-the-wall" Install

Page 7

Installation (For Qualified Installers Only) 15© Travis Industries 4080728 100-01156Installation Example: Interior Vertical InstallationType "L

Page 8

16 Installation (For Qualified Installers Only)© Travis Industries 4080728 100-01156Installation Example: Class A Chimney RetrofitVent Clearance*Vent

Page 9 - Venting the Pellet Stove

Installation (For Qualified Installers Only) 17© Travis Industries 4080728 100-01156Installation Example: Masonry Fireplace Hearth Stove“L” Vent Flex

Page 10 - 4080728 100-01156

18 Installation (For Qualified Installers Only)© Travis Industries 4080728 100-01156Installation Example: Zero-Clearance (Metal) Fireplace Hearth Sto

Page 11 - Mobile Home Requirements

Installation (For Qualified Installers Only) 19© Travis Industries 4080728 100-01156Installation Example: Freestanding Masonry Chimney“L” Vent Sectio

Page 12 - Restrictor Adjustment

2 Introduction© Travis Industries 4080728 100-01156IntroductionWe welcome you as a new owner of a Yankee pellet heater. In purchasing a Yankee you ha

Page 13 - Thermostat Installation

20 Operation© Travis Industries 4080728 100-01156Safety NoticeRead this entire manual (especially the "Safety Precautions" on pages 4 and 5)

Page 14

Operation 21© Travis Industries 4080728 100-01156Loading PelletsLift the hopper lid to its vertical position. Pour pellets into the hopper until full

Page 15

22 Operation© Travis Industries 4080728 100-01156Manual ModeManual mode requires the user to turn theheater on and off manually.To StartPress the &quo

Page 16

Operation 23© Travis Industries 4080728 100-01156Auto ModeAuto mode allows you to use a thermostat to control room temperature. The stove automatical

Page 17

24 Operation© Travis Industries 4080728 100-01156Restrictor AdjustmentThe restrictor is used to adjust airflow to the firepot. It should be adjuste

Page 18

Operation 25© Travis Industries 4080728 100-01156Start-Up SequenceThis stove utilizes a start-up sequence whenever the mode switch is changed or the h

Page 19

26 Operation© Travis Industries 4080728 100-01156"MANUAL AUGER" ButtonThis button turns the auger on. It is used to “prime” the auger after

Page 20 - Operation

Maintenance 27© Travis Industries 4080728 100-01156Daily Maintenance (whenever using the stove)Inspect the BurnWhen burning on high, theflames should

Page 21 - Operation 21

28 Maintenance© Travis Industries 4080728 100-01156Daily Maintenance (whenever using the stove) - ContinuedCheck Firepot forClinkersIf the flames seem

Page 22

Maintenance 29© Travis Industries 4080728 100-01156Daily Maintenance (whenever using the stove) - ContinuedDoor OpeningWARNING :Make sure theheater

Page 23 - Operation 23

Table of Contents 3© Travis Industries 4080728 100-01156IntroductionIntroduction...2Important Infor

Page 24

30 Maintenance© Travis Industries 4080728 100-01156Weekly Maintenance (or every 5 bags of pellets)Flyash RemovalThis heater was designed to allow for

Page 25 - Operation 25

Maintenance 31© Travis Industries 4080728 100-01156Weekly Maintenance (or every 5 bags of pellets) - continuedCleaning the Optional Gold Surfaces (Doo

Page 26

32 Maintenance© Travis Industries 4080728 100-01156Weekly Maintenance (or every 5 bags of pellets) - continuedSweep Ash Into AshpanSwing the side ash

Page 27 - Maintenance 27

Maintenance 33© Travis Industries 4080728 100-01156Weekly Maintenance (or every 5 bags of pellets) - continuedCheck Ashpan, Dispose if necessaryWARNIN

Page 28 - Maintenance

34 Maintenance© Travis Industries 4080728 100-01156Yearly Maintenance (or every ton)The following section details extensive maintenance procedures. W

Page 29 - Maintenance 29

Maintenance 35© Travis Industries 4080728 100-01156Yearly Maintenance (or every ton) - continuedClean the Exhaust BlowerRestrictor KnobaOpen the hoppe

Page 30

36 Maintenance© Travis Industries 4080728 100-01156Yearly Maintenance (or every ton) - continuedDoor Seal! Air leaks into the firebox will decrease th

Page 31 - Maintenance 31

Maintenance 37© Travis Industries 4080728 100-01156Yearly Maintenance (or every ton) - continuedAdjusting the Door Hinge and Latch• The door hinge and

Page 32

38 Maintenance© Travis Industries 4080728 100-01156Yearly Maintenance (or every ton) - continuedCheck for Air Leaks Around the Door, Glass, and Ashpan

Page 33 - Maintenance 33

Normal Operating Sounds 39© Travis Industries 4080728 100-01156Auger MotorWhen feeding pellets, you may hear the intermittent buzz of this motor runni

Page 34

4 Safety Precautions© Travis Industries 4080728 100-01156• Do not operate theheater if you smellsmoke coming fromthe heater. Turn theMODE switch to&

Page 35 - Maintenance 35

40 Safety Label© Travis Industries 4080728 100-01156WARNING - DO NOT REMOVE OR COVER THIS LABELListed PelletizedSolid Fuel Burning ApplianceAlso for U

Page 36

Limited 7 Year Warranty 41© Travis Industries 4080728 100-01156To register your TRAVIS INDUSTRIES, INC. 7 Year Warranty, complete the enclosed warrant

Page 37 - Maintenance 37

42 Index© Travis Industries 4080728 100-01156"AUGER ON" Light...25"FAULT" Light...

Page 38

Safety Precautions 5© Travis Industries 4080728 100-01156• The heater will not operateduring a power outage. Ifa power outage doesoccur, check the h

Page 39 - Normal Operating Sounds 39

6 Specifications© Travis Industries 4080728 100-01156Heating SpecificationsApproximate Maximum Heating Capacity (in square feet)* ...

Page 40 - Safety Label

Installation (For Qualified Installers Only) 7© Travis Industries 4080728 100-01156Before You BeginREAD THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE

Page 41 - Limited 7 Year Warranty 41

8 Installation (For Qualified Installers Only)© Travis Industries 4080728 100-01156Clearances - Straight Installation2” Minimum**6” Minimum3” Minimum

Page 42 - 42 Index

Installation (For Qualified Installers Only) 9© Travis Industries 4080728 100-01156Venting the Pellet Stove• INSTALL VENT AT CLEARANCES SPECIFIED BY

Comments to this Manuals

No comments