Lopi Yankee PS User Manual download pdf (Page 34)

34 Maintenance

Yearly Maintenance (or every ton)

The following section details extensive maintenance procedures. We strongly suggest

these items be carried out by a trained service technician, possibly by a service agreement

set up with your dealer.

WARNING: Disconnect the power cord and make sure the heater has fully cooled

prior to conducting service.

Soot and Flyash: Formation and Need for Removal – The products of combustion will

contain small particles of flyash. The flyash will collect in the exhaust venting system and restrict the

flow of the flue gases. Incomplete combustion, such as occurs during startup, shutdown, or incorrect

operation of the room heater will lead to some soot formation which will collect in the exhaust venting

system. The exhaust venting system should be inspected at least once every year to determine if

cleaning is necessary.

Clean the Vertical Exhaust Duct

Clean the refractory and

the entire area behind it

(both sides).

Remove these doors to

remove fallen flyash and

soot (see “Bi-Weekly

Remove both

refractory clips.

Clean the Exhaust Duct

(the stove must be cool

and unplugged)

Clean the Convection

Blower

(the stove must be cool and

unplugged)

The convection

blower inlet can

be vacuumed

out (if needed).

If extensive

cleaning is

needed, it can

be removed for

cleaning.

Remove the

cover plates over

the exhaust duct

(both sides)

Swing the side panels open.

7/16" Nutdriver

Cover Plate

Use a vacuum or bottle

brush to remove all

flyash from the exhaust

duct (if the gasket is

damaged, replace).

Phillips

Screwdriver

Open the hopper lid and remove the two

screws holding the side doors in place.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Lopi Yankee PS User Manual Page 34

Comments to this Manuals

Related products and manuals for Tools Lopi Yankee PS